Sunday, September 14, 2014

More Panzergrenadiers! Weekend General's Germans, continued...

Here's the second platoon of my mid/late war German Panzergrenadier force for Warlord Games' Bolt Action. These are predominantly models by Wargames Factory, with an odd figure from Warlord or Perry. I went with these two manufacturers because I really prefer the less heroic stature of the models, especially when placed next to my vehicles.

 photo SecondPlatoonCommand1.jpg

This is the leutnant and attendant, and were the first two guys I painted out of this 2,000 point force. They're better than some of the work I did in first platoon, but again still not my best.

Moving on... here's the infantry!

 photo SecondPlatoonFirstSquad.jpg

 photo SecondPlatoonInfantry1.jpg

 photo SecondPlatoonSecondSquad.jpg

Perhaps a bit out of order, here's my artillery observer!
I was really happy with the way this guy turned out. The map is two-part expoxy (milliput?), and painstakingly painted with really thin paint. The final effect turned out really well.

 photo SecondPlatoonArtillerySpotter.jpg

Next up is the requisite MMG team. The infantry are Wargames Factory, while the MMG is Warlords and the tripod is a custom assembly.

 photo SecondPlatoonMMG.jpg

 photo SecondPlatoonMMG2.jpg

Just as with my other weapons teams, I base the weapon on a 60mm base and then the crew on individual 20mm (?) bases that came with the Perry DAK box. This makes removal of casualties a heck of a lot easier.

This is the sniper team I put together because a lot of the history I've read, as well as the plethora of documentaries I've watched, seems to indicate snipers were everywhere! This guy is armed with a G43 so limits the timeframe in which games can be played, but looks cool and had the scope on it already.

 photo SniperTeam2.jpg

 photo SniperTeam3.jpg

Here's my heavy mortar. The tube is part of a Wargames Factory kit, while the base and tripod are scratch built. No, it's not as detailed as a kit from Warlord... but it's cheap and it does the job on the table. The crew are mostly Warlord, with one Wargames Factory guy thrown in because by this point I was starting to run out of figures.

 photo HeavyMortar5.jpg

 photo HeavyMortar2.jpg

They really suffered from the frosting effect that I believe happens when spraying clear coat in hot, humid weather. Primer leaves almost a 'fuzz' on them when used in the same weather. I really need a garage.

 photo HeavyMortar3.jpg

This is the spotter for, primarily, the heavy mortar though I could just as easily use him for the medium mortar. Personally I think the heavy mortar benefits most from the spotter because they're better off being far back and hidden.

 photo MortarSpotter2.jpg

 photo MortarSpotter1.jpg

This is the latest addition to my Panzergrenadiers... a 15cm nebelwerfer 41! I haven't used it in a game yet but a lot of people on the forum say they're great, and it is certainly a cool weapon so we'll see. I'm really please with the way the model turned out. As with all my crewed weapons I based the crew separately but in this case it's also so I can cinematically set them off to the side with the thing fires... apparently the crew had to be something like 15 meters away from the weapon when it fired.

 photo Nebelwerfer2.jpg

 photo NebelwerferCrew2.jpg

 photo NebelwerferCrew.jpg

And finally, the whole force. So far, that is..

 photo WholeForce1.jpg

That's it for now. I've got Captain Veers himself as a work in process and then it's on to vehicles if I could get me blasted airbrush to work properly (all user error, I'm sure).
Thanks for looking, and Game On!!

Panzergrenadiers! Weekend General's Bolt Action Germans, Part 1

Here is the 'first platoon' of my mid/late war Panzergrenadier force for Warlord games. They're predominantly from the Perry Miniatures' DAK box. I have to say these were a good value. They were reasonably easy to assemble, there are a lot of options, and you get a lot of troops from one box. The only real problem I had with them was that the helmets/field caps sit really high on their heads, but if you cut down the top of their noggin the headgear fits fine. If you look closely you'll see which models were made before I learned this trick.
My force, which totals about 2,000 points, consists of Perry Miniatures and Wargames Factory for the most part plus a few Warlord Games figures thrown in. I've been inspired by the 21st Panzer Division because they fought in several theaters. Since I used Perry's DAK box to start with I've decided these figures will be the veterans that've fought through several theaters of battle. This, in my mind, explains the older kit they're wearing. The Wargames Factory models will be the regular infantry.

This first post will cover the command section of the platoon. The leutnant is as good a place as any to start so here we go...

 photo 5a55735e-2235-4081-bae3-bd9b5e8921c6.jpg

The officer looks like he is waving the men forward, luger pistol at the ready, while the attendant is ducking and covering from some unseen explosion or shot.

Here are some other pics.

 photo FirstPlatoonCommand1.jpg

 photo FirstPlatoonArtillerySpotter.jpg
This is the radio operator from the box, whom I plan to use as an artillery observer.


Next up are a few pics of my medic. The model is by Warlord, which a little chopping to reposition hands and such made for a cool look. I really like the way this guy turned out... it's like he's kneeling down to give a drink of water to a fellow soldier before going to work on the wounds. Since our games are based on the Western Front, he's not armed. ;)

 photo 682a63c7-3a97-4f46-a17f-c30ba1a417af.jpg

 photo 140570b5-11fb-4b6b-94a3-d4ff454bd78f.jpg


That does it for the command section. Next up we'll look at the boots on the ground... the infantry!

Here's the first infantry squad of this platoon. I actually painted these guys after the Wargames Factory models and I think I got into a "just get it done" sort of mindset. Not my best work, but they're painted. One other thing that REALLY gets my goat is the models that look 'frosted' in some pics. When I went to do the matte varnish it was particularly hot and humid outside so I think that's why they ended up that way. Other models I did a few weeks later in more mild weather turned out just fine. Since these guys belong to a motorized platoon I've decided it's... ummm... road dust. Yeah. They're coated in dust from the road after having raced into position to blunt an Allied attack. Since they're veterans I made a concerted effort to stick with MG34's where possible as well as avoiding late war arms like STG44's and the like.

 photo FirstPlatoonFirstSquad.jpg

 photo FirstPlatoonFirstSquad2.jpg

For those of you thinking "But good sir, you've used models with the older knee-high canvas boots. Weren't these phased out by 1943?" Well yes, snarky ready with an eye towards accuracy you're correct! What you don't know is that the chaps pictured here with the black knee-highs are of course participating in field trials of a knee-high leather boot, ordered by the Genaralquartiermeister at OKH. Many of the 'grenadiers have gladly got rid of theirs in favor of the more common ankle boots.

 photo FirstPlatoonSecondSquad.jpg

I really like the LMG gunner in this squad... sort of like he's just running up to a wall to lay down some cover fire.

Next up I'll regale you with the first platoon support units. As soon as my friend told me he was playing a US force, and I was going to run with the Germans I knew I wanted as many MG34 and MG42 teams as I could get. Their look is so iconic, and hearing that bbbrrrrraaaaapppp sound in all the movies and documentaries just stuck with me. So, I'll start with first platoon's MMG team!

 photo FirstPlatoonMMG.jpg

 photo FirstPlatoonMMG2.jpg

The perry miniatures come with, I think, 20mm round bases. Too small for regular gaming bases but GREAT for weapons teams. I base the weapon on a 60mm base, and then each team member individually for easy removal of casualties. The actual MMG is a rather hastily constructed affair, much inspired by the engineering adventures of a Warlord Forum dweller by the name of Rich H. While I'm nowhere NEAR his level of ability the end result works for me. The MMG itself is a spare from a friend's Warlord infantry sprue, plus some styrene rods. The ammo box comes from the Wargames Factory sprues. All in all, a good look... you know, despite that accursed frosting effect.

Next up, my light mortar. I had a few spare prone fellows and after my regular opponent used light mortars, and their move'n'fire ability to good effect I decided I'd have one as a cheap option.

 photo LightMortar1.jpg

 photo LightMortar2.jpg

Now, after initially reading the rule book I thought that mortars might not really be a good investment, points-wise, because they're so hard to score a hit with. However, being the history nerd that I am, I have read and heard in numerous books and documentaries about how the mortar caused a rather large number of casualties so I figured I might as well take one. Thus, here is my medium mortar team.

 photo MediumMortar1.jpg

The figures are Perry, while the mortar itself is from some futuristic game by Wargames Factory. I scored the bits off of eBay and while they're not at all historically accurate, they were excessively affordable and the average American player of Bolt Action probably won't notice. I really like the guy with his fist in the air as if to signal the next shot.

 photo MediumMortar3.jpg

Alright, next up is the ATR Team. Sure, by the time of our games set in 1944, this thing won't be destroying any tanks it does work well against my opponent's really annoying MMG Jeeps and as a high powered poor man's sniper against his accursed veteran infantry. Plus, we occasionally dabble in Italy, when they were maybe still used on occasion? Shhh. Leave me my dreams! Really, I just had a few spare prone figures and I really like the look of the weapon.

 photo ATR2.jpg

Now, last up I believe, is the Flak 38. This was a no-brainer for me. The scene in Saving Private Ryan where the SS soldaten blast the paratroopers off the Tiger with the 20mm cannon was mindblowing to me. Also, since my friend plays a US force, I face a lot of really annoying air strikes so a little AA capability can't hurt! The gun itself is from Company B and I have to say it went together really well. About two days after I assembled it, another fellow on the forum told me about a plastic kit he'd found and I sadly really like that one a LOT better. Oh well. I'm not going to throw away $20 so here it is.

 photo Autocannon.jpg

 photo KettenkradandAutocannon.jpg

The kettenkrad is by Perry, from their DAK line. I went with this versus Warlord's simply because I wanted it to fit the look of the rest of the platoon. The crew are also Perry DAK and yes, just for the heck of it, I did the one guy with the canvas boots. I decided he has really big feet and the only boots the Quartermaster could find were these.

Well... I think that does it for my first platoon models. That's probably a good thing with all the pics already in this post.

Next post will look at the second platoon!

Thanks for looking. Game on!!